Rah - Frame Kit


More than 10 available

Rah Frame Kit Combo

We have put together some combo deals so get a 15% discount when ordering the frame and TPU together.

Each combo deal includes 1 x Rah Frame, 1 x TPU Camera Mount, 1 x TPU Turtle Mode Fin, 1 x TPU Camera Mount and 1 x TPU VTX Antenna Mount. Available now for just £59.50 (usual price, £70.00).

15 OFF
Analogue Setup
Price - £59.50

Comes with the standard Turtle Mode Fin

DJI HD Setup
Price - £59.50

Comes with the DJI Turtle Mode Fin with integrated VTX Antenna Mount

Comes with the 40 degree fixed angle camera mount

TPU Parts

Rah - Alloy Upgrade Kit

The Rah frame kit comes with hardened steel button head bolts for the top plate. If you prefer the bling bling look and want to save a gram or two then you can add an Alloy Upgrade pack to your order.

Upgrade Pack Includes 4 x 7075 Alloy Anodised Button Head Bolts


More than 10 available

Frame Overview

The 'Rah' is the latest lightweight race frame from HaloRC, and probably our very best frame yet.

We have taken the trend of race frames that have arms that connect at the front and rear of the frame to the next level.

Developed throughout the entire 2019 race season, with our sponsored pilot 'Knighthawk' taking 6th place in the British Championships.

The main feature of this frame is what we call the 'spine', it is an extra piece of carbon that runs down the body of the frame.

The spine is used to connect the front and rear arms and provide an extra point of contact for the arms to butt up against.

This creates a unique chasis system that helps distribute impact forces through the frame. One of the added benefits is that we can run separate arms that only require the removal of one bolt to replace.

The FPV camera is arguably the most important part on a race setup, and the Rah has been designed with a lot of focus in this area. There are a range of camera mounts available to fit all the various micro and mini sized cameras. The kit comes complete with a basic universal mount.

The other modular area is the VTX antenna mounts. Using our tried and tested mounting system from the Nemesis and Nimrod frames, we can create TPU mounts for any antenna and they use the top plate to help secure them in place.

The Rah is available in either True X or Stretch X configurations, and both weigh 65g (not including TPU options).

The flight controller stack is offset from the centre of the frame to allow more room for the camera to sit behind the front standoffs. There are mounting options for either a 30.5mm or a 20mm stack.

The spine and bottom plate work together to allow up to 2 battery straps to be used to secure the lipo in place, this greatly reduces the chance of battery ejection and straps breaking.

View Cart (0)